Is your KLNE Sunteams Solar Inverter showing a High Temperature Error?
[contact-form-7]
KLNE Sunteams solar inverters should last longer than 5 years. However, a lot of factors may affect its efficiency. We, at Gold Coast Power Solutions, have seen that a common issue for KLNE Sunteams solar inverters is a failure on its temperature sensor.
On hot days KLNE Sunteams solar inverters can be affected by the high temperature if they are installed in full sun, and in these conditions they may display a high temperature error if it gets especially hot. In this case the red fault light on the inverter would be lit as well – this is normal behaviour for the KLNE Sunteams inverter if it’s overheating. If it’s not a hot day and your inverter and your inverter is baking away in the full sun and you’re still getting a High Temperature message coming up on the screen then your solar power system is not producing any power and most likely has developed an issue that needs looking into.
Causes of a KLNE Sunteams Solar Inverter High Temperature Error
As already has been discussed if the inverter is in full sun on a very hot day then it may display this error; if the error clears when it cools down then your best course of action would be to try and protect the inverter from the high temperatures.
If your KLNE Sunteams solar inverter is showing the High Temperature message and it is quite cool, it’s most likely that there’s an internal issue with the temperature sensor in the inverter. This causes the temperature sensor to incorrectly detect an issue and display the High Temperature reading.
How do you troubleshoot high temperature reading on a KLNE Sunteams solar inverter?
First, try rebooting your solar inverter. Make sure to follow the proper shutdown procedure:
- Turn off the SOLAR SUPPLY MAIN SWITCH or Inverter AC Isolator.
- Turn off the PV Array DC Isolator located at the inverter.
- Wait for approximately 1 minute.
- Turn on the AC Isolator.
- Turn on the PV ARRAY DC Isolator.
- Wait until the green Power light is on.
If the issue persists, you will need to contact a solar accredited electrician to have a look at your KLNE Sunteams Solar Inverter High Temperature Error issue.
If you need any further assistance with your KLNE Sunteams Solar Inverter High Temperature Error issue, we can help! Just complete the form on this page with your details so our team can provide you with further assistance.
Click here to get your solar power system back saving you money rather than costing you money!
Got A Question About Solar Power? Click Here For Answers!
- Can you add more solar panels to your solar power system?
- How much power can you expect from your solar power system?
- Do you know how to read your Energex solar power meter?
- Could you be saving hundreds of $$ on your pool power costs?
- How to make the most of the 44c feed in tariff
- How to get the most out of your solar power system on a low feed in tariff
The post KLNE Sunteams Solar Inverter – High Temperature Error appeared first on Gold Coast Solar Power Solutions.