Is your Latronics Inverter Dead (red lights not lit)?

[contact-form-7] Latronics Inverter Dead

One of the common issues we come across at Gold Coast Power Solutions with Latronics inverters is when they are totally dead – none of the 4 red lights are on. When the sun is shining, the first gauge to see if the Latronics inverter is working is to see if the red light on the 25% power level indicator is, at the very least, lit.

If you check your Latronics inverter when the sun is out and find that there’s no red lights on at all it means that the Inverter is not producing any power – something needs to be done straight away to get your solar power system back saving you money!

What to do with a Dead Latronics Inverter – no Red Lights

When this happens, check the following first:

Check that the DC circuit breaker on the inverter is turned ON, and
The 2 plugs on the right hand side of the inverter are plugged in.

If either of these if off or unplugged, turning them on or plugging the plugs into the inverter should immediately resolve the issue.

If you are still having issues with your Latronics inverter you will need a solar accredited electrician to look into why the inverter isn’t working. If you are near the Gold Coast leave your details on the form on this page.

We will check the inverter is receiving power from the solar panels, if there is DC power at the plug from the solar panels the issue is most likely with the DC circuit breaker built into the inverter. The Latronics inverters have a 5 year warranty so if the issue is with the inverter and it was installed within the last 5 years it may be a warranty claim, if not there is a number of different options to consider.

Click here to get your solar power system back saving you money rather than costing you money!

Got A Question About Solar Power? Click Here For Answers!

The post Latronics Inverter Dead – No Red Lights On appeared first on Gold Coast Solar Power Solutions.