Do you have an Aerosharp Solar Inverter Grid Volt Error Issue?

[contact-form-7]

When an Aerosharp solar inverter is displaying a Grid Volt Error message the Power and Fault lights on the inverter are lit which means it’s detecting solar power but there is a fault – if the run light is not lit your AeroSharp inverter isn’t working, so you will want to do something about this ASAP.

The AeroSharp Grid Volt Error message is telling you that the inverter is not detecting any power from the electricity grid. If you see this error there are a couple of things you can check as follows.

What can you do about an Aerosharp Solar Inverter Grid Volt Error issue?

Check for the following:

• See if the switches are turned on such as the inverter AC Isolator beside the inverter (if applicable) and the Solar Supply Main Switch on the switchboard.
• Check if the AC plug to the inverter (on the right hand side) is connected properly.

If you have power from the street on all your other appliances, you’ve checked the above and your inverter is still showing the Grid Volt Error message you are going to need to employ the services of a local solar accredited electrician. They will need to check that power is reaching the inverter from your switchboard by testing the voltage at the AC plug of the inverter. If 240V is present at the inverter and the Grid Volt error issue persists it is indicating that there’s an internal fault with the inverter.

If the inverter is installed within the last 5 years it should be covered with warranty, but unfortunately Aero-Sharp Electric is no longer around to honor any warranties. You have the inverter repaired but this is quite costly and will still leave youk with an inferior-quality inverter without a warranty. In our opinion it’s best to bite the bullet and replace it with a good quality inverter that’s going to give you a full warranty. If you decide to do this it’s important to know the power rating of your AeroSharp inverter; this can be found on the side of the inverter as the Nominal AC Power.

If you need further assistance with your Aerosharp Solar Inverter Grid Volt Error issue and you’re in the Gold Coast or Brisbane area just complete the form on this page with your details and our team of experts will provide you with further assistance. If you are somewhere else in Australia please click on the following link, we have quality replacement solar inverters we can have delivered to your door.

Click here to get your solar power system back saving you money rather than costing you money!

Got A Question About Solar Power? Click Here For Answers!

• Can you add more solar panels to your solar power system?
• How much power can you expect from your solar power system?
• Do you know how to read your Energex solar power meter?
• Could you be saving hundreds of $$ on your pool power costs?
• How to make the most of the 44c feed in tariff
• How to get the most out of your solar power system on a low feed in tariff

The post Aerosharp Solar Inverter Grid Volt Error appeared first on Gold Coast Solar Power Solutions.